Synology’s telegraphed moves toward a contained ecosystem and seemingly vertical integration are certain to rankle some of its biggest fans, who likely enjoy doing their own system building, shopping, and assembly for the perfect amount of storage. “Pro-sumers,” homelab enthusiasts, and those with just a lot of stuff to store at home, or in a small business, previously had a good reason to buy one Synology device every so many years, then stick into them whatever drives they happened to have or acquired at their desired prices. Synology’s stated needs for efficient support of drive arrays may be more defensible at the enterprise level, but as it gets closer to the home level, it suggests a different kind of optimization.
I have a synology I bought 3rd party ram (not synology) and it works fine. Same with drives just bought some seagate drives. Probably going to upgrade from a 4 bay to a 12 and I don’t see compatibility of ram being an issue. I just don’t feel like building a whole racked system I just want to plug and play and forget. As of now tho only thing I lose is warranty cause I’m using not “certified” ram and drives.
Yeah I expected that this would happen. They already did this with RAM. They just rebrand RAM, sell it for a way higher price and add a check. When they brought their own branded HDDs, I knew they will pull of the same scam.
Building an own server isn’t that more expensive and you don’t have to deal with the whole lockout with Synology. For example I had quite the issue to access hardware. I wasn’t able to get Home Assistant running on my NAS. The issue was my Zigbee USB Stick. I got it running to the point where I was able to send commands (e.g. turn on or off lights) but the status didn’t came back. I threw it on my Pi3 (now Pi5) and zero issues.
The next NAS is self build. Probably Proxmox as base, with truenas or so as main server and the rest depends on what I might need.
For me at least I never considered a synology nas it seemed like the apple of home servers. Especially when I enjoy building machines anyway there was no point. Although I can definitely see the appeal for some people.
I wonder if there are more open solutions that don’t require building a machine from scratch.
That’s a massive shot in the foot.
As a Synology owner, I already had enough - they have arbitrarily cut customer support to sanctioned jurisdictions, leaving me without the support they promised and I expected when paying for a device.
Next one will definitely be built from the ground up.
They are probably betting they will make more money from businesses. I.e., actual pros, vs prosumer.
I do like my Synology NAS I bought 10 yrs ago, but these days there are more and better alternatives for people who dont really need to pay for the support and stability.
I had Synology for a second but built my own server, went UnRAID, and never looked back.
Started messing around with docker containers on a small Synology box a few years ago, dumped Synology with a quickness in favor of just building an Ubuntu-based NAS. I’m running TrueNAS Scale bare metal now and getting ready to dump it to go back to another roll-my-own Linux + ZFS setup, possibly using Cockpit and the ZFS extensions from 45 drives.
This is the way.
Such a silly move. Like shooting yourself in the foot to sell more bullets
Actually perfect timing (for me, it’s all in all terrible)… I was about to buy myself a NAS and struggled to figure out which to get, and this removes at least one option.
Honestly if you’re comfortable with Linux I just built my own at this point, but if you’re not then obviously don’t take my advice
As I read this, I am just transfering over to TrueNas on totally open hardware (from Synology). After 1 week, I am loving it. A bit of a learning curve, but TrueNas seems really nice and solid.
I’m not saying that they won’t do this, but so far their actual actions have ended up pretty decent. I’ve had 3 Synology devices over the last 12(?) years, and while they are not perfect, they have been very good at delivering what they promised over the long haul. All of them still work fine. Even the old guy delivers.
Damn it I already own own one. I guess I funded this cunt corporate move
Me too. Invested in my setup last year :(
This is why I chose an ASUS nuc + external bay-storage for my home networking needs, felt like synology NAS would be a limiting factor.
So you built your own NAS, then. NAS is just an acronym, “Network Attached Storage”. Not a singular line of products.
That said - I also feel the same way about Synology and the other “all-in-one NAS” brands. Expensive for what they are, which is essentially an incredibly cheap PC with a built in toaster. I built my NAS out of a 2014 Mac Mini (running OMV) and a Sabrent USB-C 4-bay drive dock, and even full of WD Reds, that entire rig is literally half the price of a DS920+. And more powerful.
Is the main appeal of prebuilt NAS cases the aesthetics and the reduction of DIY concerns?
Because they seem to me like overpriced and underpowered computers. Most tech-oriented folks I know have more powerful PCs in a closet somewhere that they could easily convert into a NAS
Edit: some very thoughtful responses thanks y’all! I definitely see the appeal for people who just need something that doesn’t need tinkering or care significantly about power draw and noise.
Reliability. We’ve put them in small businesses and they do their job very well VS a frankenpc NAS.
I have 2 8-Bay devices at home and they are so good for what they are. Silent, low power, bit of fancy utility for those that like it but reliable and quality. They age very well.
I also use the surveillance station with my cameras which all connected ootb fine. (mix of brands)
I think the biggest draw to Synology now is the ultra low power consumption. Yeah, you could totally repurpose an old PC, but it’s crazy to run 500W perpetually. The reason they use old Celeron processors is the low power draw. In time, hopefully, RISC V can produce some low cost systems that would slot in well for this use case.
Obviously everything depends on use case. I definitely am a tinkerer and prefer options. I’d never run a jellyfin server off a synology NAS cause… Well cause it can’t transcode very well. So efficiency is less of a concern than processing power.
I get now that my questions was a bit moot, obviously some people will pay a premium for a narrow use case if it brings reliability and ease of use.
You are paying for reasonably well polished software, which for non technical people makes them a very good choice.
They have one click module installs for a lot of the things that self hosted people would want to run. If you want Plex, a onedrive clone, photo sync on your phone, etc just click a button and they handle installing and most of the maintenance of running that software for you. Obviously these are available on other open source NAS appliances now too so this isn’t much of a differnentiator for them anymore, but they were one of the first to do this.
I use them for their NVR which there are open source alternatives for but they aren’t nearly as polished, user friendly, or feature rich.
Their backup solution is also reasonably good for some home labs and small business use cases. If you have a VMware lab at home for instance it can connect to your vCenter and it do incremental backups of your VMs. There is an agent for Windows machines as well so you can keep laptops/desktops backed up.
For businesses there are backup options for Office365/Google Workspace where it can keep backups of your email/calendar/onedrive/SharePoint/etc. So there are a lot of capabilities there that aren’t really well covered with open source tools right now.
I run my own built NAS for mass storage because anything over two drives is way too expensive from Synology and I specifically wanted ZFS, but the two drive units were priced low enough to buy just for the software. If you want a set and forget NAS they were a pretty good solution.
If their drives are reasonably priced maybe they will still be an okay choice for some people, but we all know the point of this is for them to make more money so that is unlikely. There are alternatives like Qnap, but unless you specifically need one of their software components either build it yourself or grab one of the open source NAS distros.
I see! Thanks so much for the thoughtful response definitely seems like there’s a use case for people who might be more creatives with a need for storage rather than self-hosting enthusiasts who want to mess around in a homelab.
The prices are still a bit eye watering but you pay for software support for sure.
I am a tech oriented person, I work in IT, and a Syno ticks the boxes in many respects.
-
Low power draw. Power efficiency is very important to me, especially for something that runs 24/7. I don’t know how efficient self-build options are these days, but 10 years ago I couldn’t get close to the efficiency of a good NAS.
-
Set and forget. I maintain enough systems at work so I don’t really want to spend all of my free time maintaining my own. A Syno “just works”, it can run for months or years without a reboot (and when it does need one, it does it by itself overnight), and I can easily upgrade or swap a dead drive in a couple of minutes. When the entire NAS dies I can stick the drives in a new one and be up and running almost instantly.
-
Size and noise. I don’t have a massive house, so I need something that can sit on a shelf and be unobtrusive. In our last house it was literally sat in the living room, spinning drives constantly, and nobody was bothered by it.
The Syno I have is plenty good enough to run a bunch of Docker containers and a few VMs for all of my self hosted stuff, and it just does the job efficiently, quietly, and without complaining or needing constant maintenance.
I don’t like this creep towards requiring branded drives and memory, though I’m pretty sure it’s not legal in the EU. Regardless there are ways around it.
One question in regards to your noise comment: What drives are you running? I have a synology with 2 toshiba mg08 16tb drives and those things are unbearably loud when reading or writing. A lot of that obviously comes down to the drives themselves but I also kind of blame the plastic chassis for probably resonating with the noise and not being better at soundproofing.
It’s an 8 bay unit with six drives that are a mix of WD Red and Seagate Ironwolf, all NAS grade drives, basically. The other two slots have SSDs for hosting the aforementioned containers and VMs.
The largest drives I have are 4TB though, so maybe the larger capacity ones are louder? I also ran the fan profile in whatever the quietest setting is.
We use DS223j’s at work for our clients as backup targets.
Fast to set up and configure from a total beginner up to experienced IT personal.
And I set up NFS, Samba and ACLs in my own Debian NAS.
It aint so sleek and braindead-simple like a Syno does it.Yeah I agree, I set up a synology as a little summer project and I didn’t want to go out and source parts and put a nas Linux distro to do everything myself. Synology is newbie friendly and kind of holds your hand to do everything even dynamic dns. However, if I were to get another nas, I would be more comfortable setting it up myself.
-
1U form factor, 4 disks, using 7w whilst idle, decent enough CPU to run 1 Linux VM
I bought an RS822+ for as a veeam Linux repo.
I can’t make that myself, or I don’t know how.
It was stupid expensive and if it wasn’t the business paying I would have probably put a bunch of disks into an HP elite desk.
Well, I had been considering one, but I guess not
It sucks, because all things considered, they’re great little devices. I really like mine.
That’s what I’ve heard… Getting real tired of people building great products only for corpos to find a way to make it terrible for an extra buck
Def agree.
I own a Synology NAS. It’ll be the first and last one I buy. When I need an upgrade I’ll go back to building my own again.
I’ve heard good things about Qnap
but I also heard good things about Synology…
Also on my first and last I think.
I was thinking of buying a Synology system. I was actually looking at prices this past week.
That being said, I’ve got an old 2019 desktop running Windows that is coming to the end of its support, that I was considering making a Linux machine.
How complex is making a roll-your-own NAS?
Really depends on what you want out of the system, what you can spend and how much time you want to spend on it.
My old z390 itx system has a 16x PCIE to 4x m.2 card - leveraging an m.2 to 5x SATA adaptor with the built in SATA adaptors has given it plenty of space.
Considering I can grab m.2 to 6 SATA adaptors and fill the remainder of the slots that’s a decent chunk of drives from a single PCIE x16 slot.
Software is another kettle of fish and a good way to timesink, I’d rather not give too much of my personal experience as there are so many ways to skin that cat.
I have mini-ITX board in a mini case. 4 bays, 16 GB RAM of DDR3-L and a slow but very low TDP CPU. This thing is very low power but it’s on 24/7.
Runs home assistant with zigbee, rtl433 and whatever it detects over the network. A few older game servers (minecraft, minetest/luanti, quake 2), miniDLNA, … Arch Linux, so rolling release and always up to date with the latest versions.
Served me greatly and I haven’t upgraded because it still does what I want and I can’t find any modern CPU with a TDP this low.
How complex is making a roll-your-own NAS?
It really depends on what you want out of it. I personally installed ProxMox on an old gaming machine (DDR3 RAM old lol) and have an Open Media Vault virtual machine running on it with access to my ZFS mirrored pair of storage drives.
Enabling Samba support in Open Media Vault gives you a nice little NAS. I believe it’s okay to install bare metal if you really want to also.
It also has a nice Docker interface, so although I should probably not bundle services together so tightly, it runs things like Jellyfin for media, Paperless NGX for document storage, and NextCloud AIO for a convenient (if slightly resource-hungry) interface.
ProxMox lets me do fun things though, like back up the VMs, spin up virtual machines for PiHole ad blocking and Klipper for controlling my 3D printer.
My most important data gets synced to a subscription to a service called iDrive as my offsite. Pretty affordable for 5TB and my own encryption keys. :)
I want to stress that I’m not an IT professional or anything either. If you’re reasonably comfortable with Linux and understand some basic networking, I’d say at least getting Proxmox and/or Open Media Vault up and running so you can access it on your home network isn’t too hard.
Outside of that, and if you want HTTPS and stuff? There’s lots of guides but I would recommend using TailScale instead of opening any ports to the web.
Sorry if this post was meandering but hope it gave you a little bit to go on! :)
It’s not too complicated but you don’t get some things for free like with Synology. It require work to setup scripts for offsite backup for example whereas Synology has a backup app with a UI.
For storage, I used to run ZFS in a raidZ2 configuration. If you do this then I suggest having a cron job running a script that can alert you if the pool is unhealthy. This is again something that Synology does for free.
You could also look up trueNAS core and see if that’s something that fits for you.
Guess I am going to be taking my “pro-sumer” dollars elsewhere.
Plllbbbbbb @ Synology - I just got one of these and added 2x 4TB ssds this week. I’ll eventually add 2x more but for now I’m set: https://www.gmktec.com/products/intel-twin-lake-n150-dual-system-4-bay-nas-mini-pc-nucbox-g9
Fingers crossed that it doesn’t blow up or crap out.
Jeff Geerling: https://www.youtube.com/watch?v=M_Ft8OAPQ3g
Absolutely wild timing on this video. I built mine on Wednesday. I installed OpenMediaVault on mine. The one I bought was $30 cheaper to not have that Win 11 1TB drive. I would have wiped that anyway, and have no use for a 1TB drive.
I started mine off with heatsinks on my SSDs. Those are running at 53 C since being powered up on Wednesday after work. I didn’t go crazy with the heatsinks that pop out of the bottom or anything though, his were pretty funny to see.
These posts are absolutely perfect timing for me. I’m looking to start replacing an old Synology Diskstation I bought back in 2016 that has worked for me flawlessly. I really appreciate everyone sharing their details and experiences here.
Tldw: get some thin heat syncs 75-80c temps on the ssds
Cut some holes in the plate covering them
