Framework is definitely not Linux only (laptops are Windows by default , but they offer a no-os option to install your own). They are however generally supportive of Linux, and it’s possible that they helped make the fingerprint reader firmware work well with Linux, though I have no specific information that this was the case.
FWIW, most ThinkPad fingerprint readers (except a couple of models maybe) work out-of-the-box on Linux. Like the one on my Z13 for instance, I didn’t have to do anything to get it going on Fedora.
Also, take a look at the libfprint compatibility list here, there’s nearly 200 compatible readers listed, so I wouldn’t exactly say the number of readers that work on Linux are “rare”.
That’s incorrect - check the hardware IDs, they’re different. If it’s the same model they’ll have the same hardware ID.
Your linked thread is also from three years ago - that’s a long time in the Linux world where things change quickly. I could just as easily dig up a thread about x not working on pretty much any topic, so it’s not really evidence of anything.
Edit: I just checked the Gitlab releases page for libfprint. Not only have they added more devices (that aren’t listed on the page that I linked previously), it also proves that support for many new devices have been added over the last three years. So claiming that nothing has changed in these past three years, is being disingenuous towards the good efforts made by these devs.
@MJBrune@d3Xt3r Overall I understand your opinion and based on your needs Windows is probably the best solution.
I do however, disagree with the statement about the Linux community. Firstly, if a device doesnt work “out of the box”, the manufacturer is able to provide a driver for their device, or submit the driver directly to the kernal via a merge request so that the “out of the box” scenario does work.
When that hasn’t happened the community WILL help you, this help is NOT a “flaw”!
No, that’s a marketing issue. Different device id == different model, technically speaking. Hardware makers won’t just alter a device ID for no reason at all.
There are tons more of device IDs out there that don’t work on Linux than those ones that do.
Perhaps, but [citation needed].
No, you can’t just use any random fingerprint reader which totally works on Windows.
First of all, no one is going out and buying random fingerprint readers - these are usually bundled as part of their laptop/desktop - in which case, it’s the buyer’s responsibility to verify Linux compatibility with that computer as a whole. You can’t expect to pop Linux into any random computer, or connect any random peripheral and just expect everything to work automagically. I mean, it does happen, but that’s generally with known good Linux hardware. Eg System76s, Frameworks, ThinkPads etc.
Also, even on Windows, a fingerprint reader doesn’t normally work out of the box - you’ll need to install the drivers for it to get it going (unless of course you’re using a Windows build provided out-of-the-box by the system manufacturer). Either way, it’s manufacturer’s responsibility to create and upload drivers, and it’s their responsibility to create a Linux driver. Otherwise it’s up to the community to create it, in which case you’re back to usual rule-of-thumb where you buy only popular hardware models with known good Linux support.
Looking at the specs sheet, this stood out:
deleted by creator
In general, or for this particular reader? The Framework fingerprint reader works well.
deleted by creator
Framework is definitely not Linux only (laptops are Windows by default , but they offer a no-os option to install your own). They are however generally supportive of Linux, and it’s possible that they helped make the fingerprint reader firmware work well with Linux, though I have no specific information that this was the case.
deleted by creator
FWIW, most ThinkPad fingerprint readers (except a couple of models maybe) work out-of-the-box on Linux. Like the one on my Z13 for instance, I didn’t have to do anything to get it going on Fedora.
Also, take a look at the libfprint compatibility list here, there’s nearly 200 compatible readers listed, so I wouldn’t exactly say the number of readers that work on Linux are “rare”.
deleted by creator
That’s incorrect - check the hardware IDs, they’re different. If it’s the same model they’ll have the same hardware ID.
Your linked thread is also from three years ago - that’s a long time in the Linux world where things change quickly. I could just as easily dig up a thread about x not working on pretty much any topic, so it’s not really evidence of anything.
Edit: I just checked the Gitlab releases page for libfprint. Not only have they added more devices (that aren’t listed on the page that I linked previously), it also proves that support for many new devices have been added over the last three years. So claiming that nothing has changed in these past three years, is being disingenuous towards the good efforts made by these devs.
deleted by creator
@MJBrune @d3Xt3r Overall I understand your opinion and based on your needs Windows is probably the best solution.
I do however, disagree with the statement about the Linux community. Firstly, if a device doesnt work “out of the box”, the manufacturer is able to provide a driver for their device, or submit the driver directly to the kernal via a merge request so that the “out of the box” scenario does work.
When that hasn’t happened the community WILL help you, this help is NOT a “flaw”!
No, that’s a marketing issue. Different device id == different model, technically speaking. Hardware makers won’t just alter a device ID for no reason at all.
Perhaps, but [citation needed].
First of all, no one is going out and buying random fingerprint readers - these are usually bundled as part of their laptop/desktop - in which case, it’s the buyer’s responsibility to verify Linux compatibility with that computer as a whole. You can’t expect to pop Linux into any random computer, or connect any random peripheral and just expect everything to work automagically. I mean, it does happen, but that’s generally with known good Linux hardware. Eg System76s, Frameworks, ThinkPads etc.
Also, even on Windows, a fingerprint reader doesn’t normally work out of the box - you’ll need to install the drivers for it to get it going (unless of course you’re using a Windows build provided out-of-the-box by the system manufacturer). Either way, it’s manufacturer’s responsibility to create and upload drivers, and it’s their responsibility to create a Linux driver. Otherwise it’s up to the community to create it, in which case you’re back to usual rule-of-thumb where you buy only popular hardware models with known good Linux support.
The one on my E15 doesn’t work :(