Since all of these politicians are at the same time ensuring that they are above the law, I don’t think you can count on getting them arrested.

You can usually draw a significantly heavier compound than recurve or longbow, because the weight drops off when the bow is fully drawn.

I would say that most regular adults would be able to draw a 42# compound with no prior training.

Jellyfin has supported Music and TV shows since the start

Many accounts can go in the red

Yes, but Google would not have done that if nobody used Firefox

This is a useless comment… This issue has nothing to do with the brand of printer you bought, and everything to do with the settings of your printer and whether the filament is wet. A well tuned Ender will print better than a much more expensive badly configured printe with wet filament. Of course there are printers now that are much easier to get good results with, especially because they come with build in filament dryers, and automatic tuning.

Am Danish. This is fairly accurate, a solid 60% of Danish is just random guttural sounds. This documentary however misses that the remainder is 30% raw deadpan sarcasm, and 10% English words pronounced in an awful accent.

To contrast and compare, this is an average modern Swedish television quiz show: https://youtu.be/lzv6ljgwgzs

Dunning-Kruger is a hell of a drug…

The author of the article is clearly just confusing “encryption”, “cryptography” and “hashing”. Reading the full article makes it clear that the intention was to salt and hash the passwords, not encrypting them.

The OP made the argument that Zuckerberg wanted to know their passwords, such that if the users reused the same passwords elsewhere, then he would be able to log in there and check out their accounts.

For example he could have seen a profile he was interested in, nabbed their password and looked into their email.

Not that he wouldn’t have godmode on their Facebook account, and needed their password to access their account, because of course he could have just accessed those accounts without needing the password.

I have not heard this rumor before, though I wouldn’t be completely surprised if it was true.

Wolfram alpha says 15927

https://www.wolframalpha.com/input/?i=100+years+%2F+55+hours

Agree on both parts, but the second part can still be achieved from an unconnected car, you just can’t do it remotely

IPv6 does not require you to open your machine to the Internet, even without making use of a NAT. Sure you get an IP that’s valid on the whole internet, but that doesn’t mean that anyone can send you traffic.

Are these restrictions set out by the ISP or the dorm?

If you don’t do business with the ISP, then you don’t have to agree to and follow their terms.

So as long as the dorms doesn’t have rules against setting up your own WiFi, then you should be well within your rights to purchase an Internet connection from another provider, but since you are likely not allowed to get your own line installed, you are probably restricted to ISPs that provide a service over the cellular network.

Of course using a cellular connection will give you worse latencies for online games, but at least you can have your own WiFi with low latency for your VR.

If you want to be nice, you could then run as much of your Internet network over ethernet as possible, so you congest the air waves as little as possible, possibly only running the VR headset over WiFi, and maybe even only enabling the WiFi radio when you want to play VR. If all your WiFi devices support 5GHz, you might also completely disable your 2.4GHz WiFi, to leave the most congested frequencies alone.

To lower the chance of someone complaining about your WiFi, you should configure it as a “hidden network”, such that it doesn’t broadcast an SSID, and therefore doesn’t show up when people are looking for WiFi networks to connect to.

It kinda depends a bit on the user’s background… For someone who is used to windows and how computers in general works, I would probably agree with you.

But for people who are more phone/tablet native, I don’t think something like Fedora Silverblue is actually that bad of a choice. It comes natively with Gnome 3, which isn’t too dissimilar to Android or iOS. Updates are installed in one fell swoop with a reboot, just like Android or iOS. Flatpaks behave much more like an App on Android or iOS, they are self contained, and don’t affect eachother.

I just set up my daughters (9 y/o) first school laptop, and picked Fedora Silverblue, and apart from learning about the save icon, and learning how to store files in a filesystem, she was pretty much instantaneously functional, having most of her prior computing experience on an Android phone.

My Dashcam’s hardwire kit had the same connectors, there should be a similar connector on another cable, that doesn’t taper towards the tip. Those should fit and sort of “click” together.

No need for a physically separated network, that’s what VLANs are for

That sound like you need a more serious setup, where you can control the network priorities and set a QoS, so the devices that you use interactively get priority over the other devices.

So as far as I understand, you have

• Outer router (Comcast), which has WiFi enabled
• Inner router (your own), which has WiFi enabled, and further meshes with other WiFi mesh devices (or is the mesh separate?)
• A plain switch, for stuff you want cabled and fast

Is that correct?

Why not get the WiFi in the Comcast router disabled, and use your inner network exclusively, such that both WiFi and ethernet devices are on the same network?

That’s what I did with my network, and I even got the ISP to put their modem/router into bridge mode, so it’s completely transparent.

That makes perfect sense, and switching is definitely annoying then… But the person I responded to said they had multiple WiFi networks at home… E.g. Not on holiday