Yep when I first joined I thought it stood for main Instance.

deleted by creator

Wait your signature is supposed to just be your name in cursive? But then wouldn’t that defeat the point? I thought in the olden days it was supposed to be like a proof that you were the right person since you knew how your signature was written.

Anyways, for my signature I just kinda designed it. It was ages ago so I forgot my process, but it was deliberate and I remember making a whole bunch of sketches before finding one I liked. And since then I’ve incrementally improved it.

I thought this was going to be some math thing, turned out to be so much more straightforward.

That is some surprisingly good VFX for a meme. I wonder if the background is fully CGI or if they recreated it and cut.

While this is funny, I’m pretty sure it isn’t real (or it was intentionally written poorly)- It doesn’t make any sense in Chinese either, and most people in Hong Kong know English at least somewhat.

The Youtuber Brandon F has a 4 part series talking about why they fought like this. Spoiler- it wasn’t because they were stupid.

Part 1

TLDR- if you split up you just get run down by enemy cavalry.

Part 2

TLDR- a close formation lets you concentrate your firepower at one point.

Part 3

TLDR- a close formation makes communication and controlling the army much much easier (or even possible at all).

Part 4

TLDR- the formation makes the troops less likely to run away.

Cool, how stable is it?

oof, good luck enforcing that lol, the Benchy’s one of the most modified models out there.

The edits are really very simple, you’d just have to chop the model into a few pieces. I think windows has a built in tool that can do it. Actually I think it’s possible to print it without edits, by standing it upside-down on the flat bit at the top. However since the contact area is so small, and the print is so tall, it would be more likely to fail. I wouldn’t try it on my machine, but since you’re going through a print farm I don’t think that would be an issue, there’s no way they’d send you a failed print so they’d probably just print it again. You might get charged extra if they have to redo it? I don’t know how these companies work you’d have to ask them.

If you don’t want the glowing then I think there aren’t really any issues with printing that, as I’ve said some minor edits would make it easier to print, but it would definitely be sturdy enough.

I’m not a pro at 3D printing or painting, but I think I know enough to answer your questions.

Ok, so first thing out of the way- that model you linked is not made for 3D printing. To get a decent result you’re gonna have to edit it a bit.

This is intended to be a hand-held prop, not just a display model. So my first question is, is that even feasible? I don’t know how strong things like this are. I’m not going to be hitting anything with it, but a little bit of waving around I think would be in order.

Definitely feasible. There’s a wide range of durability with 3D printed stuff, but you’d have to go out of your way to make something that can’t handle that.

Assuming that’s ok, what material should I use? Not entirely sure I even get a choice but I think so?

PLA is the default, and it would work ok, you could also switch to PETG. PLA softens at a very low temperature- roughly 60°C. It’s not too big of a concern, but there’s a small chance of it deforming if, for example, you left it in a very hot car, or under a window that happens to focus the sunlight on it. For a prop like that you don’t have to get more fancy than that. You almost certainly get to choose- I don’t use these 3D printing services but I’d actually be slightly concerned if they didn’t.

Another question I have is about painting. I’ve seen painting guides online, but one question I have I didn’t find an answer to is again, about it being hand-held. I don’t want to use a paint that will come off or smudge with sweaty palms. Are any kinds better for that than others? Are any?

Even just regular craft-store acrylic should hold up decently well, but you should use a sealant/clearcoat/varnish. I don’t do this so I can’t help you much with that, but it should be as simple as just spraying the whole thing with it after you’re done painting.

And how close could I likely make it look like in the link? It doesn’t have to be exact, but there’s metallic parts, glassy parts, kinda gives a glowy impression… or is this going to be too hard for someone with no experience? (I’ve painted a couple of model kits when I was a kid.)

Probably not very close. The metallic parts are ok, there’s paints that mimic metal, they’re not going to look fully convincing but it’ll probably be fine. You can get glossy clearcoats too. The big issue is the glowing part. There are ways to make something look like it’s glowing by using gradients and stuff (look up OSL painting) but I don’t think that works very well at such a large scale, and it’s difficult. For something this big I think the only way to get a good effect is to make it actually glow, which is a whole 'nother can of worms. To make that part look good, you’re going to have to do a ton of work. I haven’t done anything like this before, but I’ve got some ideas for how it could be done.

Do you want to make a lightsaber, or specifically this lightsaber? If you aren’t particularly attached to this one I’d suggest looking for another model. Printables, Thingiverse, and Thangs have 3D models specifically designed for printing.

From what I’ve heard (back when I used Reddit) they aren’t linked, there’s apparently a bunch of people who have one but not the other.

Someone said that it’s cause they’re almost opposite effects- car sickness is when you feel movement but don’t see it, whereas vr sickness is when you see movement but don’t feel it- but I’d take this with a grain of salt since it’s just some random person on Reddit guessing at the cause.

Personally my experience is mostly the same as yours, I don’t get either.

Aww that’s a shame, the real Neptune looks really dull.

Because in the epilogue it’s said that Harry ended up joining the Aurors (wizard cops) after Voldemort was defeated.

They’re not contradictory. All other headsets’ passthrough is just so bad that even though the Apple headset isn’t good it’s still way ahead of them.

You can do that? I don’t use Spotify so I didn’t know.

He’s a wizard, the revolver is actually firing shrunken 16 inch HE shells.

Assuming an average of 4 minutes per song, that is 7 years and 8 months of music. I wonder how much time the ads would add?

Perfect, if your playlist doesn’t give you severe whiplash every few minutes you’re not doing it right.

HOW DO YOU YELL WITHOUT CAPSLOCK?