Hey I’m looking at doing the same- what’d you go to grad school for?

I feel pretty similar, have you found a different site you think you’ll like better?

These are all on my list of cool things I tell people about Japan. It really is a bunch of small stuff that I found great.

Another small one - most grocery stores have a packing area past payment and there’s usually a little bottle with a light temporary glue next to the plastic bags. So the line moves faster and you never fumble opening the thin plastic bags

I was just in Japan for about 4 months, mostly Tokyo. Id say somewhere around a quarter of public men’s rooms I used didn’t have soap dispensers. Taiwan was worse though - most baffling was the lack of soap on my plane to and from Taipei

Looks fine to me

deleted by creator

You should submit some of your photos to Wikipedia. They’re very clear compared to some of the handful in the article

What you’re saying is technically true but do you know what was a horrible experience?

A few weeks ago when I, in Japan, needed to download many 5+ Gb project files I had backed up on my home server in the US after a hard drive failure and I was hamstrung by my shitty domestic up speed limit.

At least with large web file hosts like Google, iCloud, and mega you’re not restricted by your inferior domestic upload speeds. Being able to access the server from anywhere is only half the battle

Reagan wanted states to raise the drinking age so he threatened to withhold federal highway funding from states that didn’t

Typo graphy 😎

The cinnamon one is Huel, which also has a better nutritional profile than Soylent

Proprietary software I use on a regular basis with no Linux alternative:

Revit, AutoCAD, Houdini, 3dsMAX, SolidWorks, Rhino, Grasshopper, Adobe Illustrator/Photoshop/InDesign (and/or their Affinity alternatives), CUDA optimized simulation and rendering plugins, etc.

I use at least one of these every day, almost none of them have any functioning compatibility with Wine or other emulation. Even just using Affinity has caused some issues with team projects when someone picks up where I left off and there’s no layer information and a ton of clipping groups instead.

If all you do with your computer is program, work with documents, use a web browser, and play video games sure go wild don’t use Windows on any of your machines. But I just don’t understand how some people in the FOSS community cannot fathom that there are entire professional workflows and industries that just have zero possibility of moving to Linux.

Do I like using Windows? No. But I do like being able to use all the programs my work and research requires.

I contribute actual, tangible research into FOSS CAD/CAM/BIM software development and implementation. I love it and want to see FOSS options grow and become widely adopted. But it just isn’t anywhere close to having feature parity. And that matters, just as much as industry interoperability matters.

I’m just so tired of this thought process in the community that the only reason someone isn’t using Linux/FOSS is because they’re some fanboy or something

The common standard for audiobooks isn’t FLAC or WAV, it’s chapter track MP3 or chapterized M4B. The vast majority of audiobooks are encoded at 64 or 128 kbps. I wish the minimum was 128kbps but that’s where the audiobooks community has been for like a decade now.

Yeah I do archviz and bim work and I’ve tried my hardest for years now to switch primarily to blender but even with all the plugins in the world I still can’t use it as a primary replacement. And don’t even get me started on some people’s insistence that FOSSCADs are anywhere near feature parity for any in depth workflow with autodesk’s suite.

I don’t use Windows/Mac over Linux because I love them, I use them because a computer is a toolkit and I need specific tools.

Sorry by trim I meant getting a cut without removing a ton of length. So yes removing the last length of your hair, an actual trim, but getting an actual styled haircut without cutting out a lot of length. They’ll cut some more off the length off of the outer layers of your hair, which I was really afraid of because my hair is already very fine I thought it’d look like I thin lanky hair after. But removing some of the outer layer let all the healthy hair that had been protected by that outer layer come out and it’s much more manageable and didn’t just slide flat into my face nearly as bad because it isn’t as damaged

It’s hard to say because there’s lots of different causes of dandruff. You can have sebum build up, dry scalp, fungus stuff. If it’s sebum build up, the scalp massage can help as can shampoo that markets itself as scalp invigorating. But not stripping or cleansing if you can help it. It can also help dry scalp in conjunction with a moisturizing shampoo. You can always mix in something like a dandruff specific shampoo every few washes. But honestly, even though it sucks, finding a good stylist in your city and booking an appointment and indicating that you’d like to have a consultation beforehand can be a ton of help. It’ll be more expensive than just getting a cut but going forward you’ll know what you need and how to ask for it.

I have long 2A hair with your goals and wear my hair slicked back and it took me a long time to figure out how to take care of it well so here are my tips:

Once you get it around the length you want, go to a good salon and get a trim. The outside layer of your hair gets the most environmental and UV damage and I bet you haven’t gotten that cleaned off since you started growing it out. Just this single item changed my mind from “I’m getting sick of long hair and I don’t know what to do with it maybe I’ll cut it all off again” to loving it more than I have in many years. It has more movement and looks way healthier and has helped me keep it out of my face.

Yes, wearing hair ties can cause your hair to thin at the front of your scalp, called traction alopecia. But only if you have some combo of weak hair retention, pull and tie your hair way too tight, and/or use too tight of hair ties all the time. This happened to me after a couple of years and switching to claw clips sometimes and changing some routine steps helped me recover most of it.

If you’re just chilling around your house try using a claw clip instead of a hair tie. I make a loop over the top of my horizontal index finger, curl my finger in to grab the hair, and then give my wrist a half to full twist so that the bend in the loop is facing down and the end of my hair is pointing up and clip it. It keeps all my hair out of my face without any pulling pressure.

Don’t use a fine, close toothed comb on your long hair. I recommend a combo of a wide space, fine tooth comb (hard to describe I wish I knew the name of it) or a paddle brush. I’ve started dropping the comb entirely and using just the paddle brush and my hair has had more body.

Find a nice shampoo and conditioner for your hair type and scalp oiliness. A nicer shampoo can be a benefit but there is a diminishing return on cost so you don’t have to buy the most expensive stuff on the market. Then work on figuring out a good shampoo schedule for your hair. Usually for me it’s one day on/one or two days off but my hair is very fine so it looks gross quickly when it gets oily (but again a nice haircut from someone who knew what I was looking for helped this out a ton, too). Every day, especially if you’ve spent all day with it tied up, use your fingers or a scalp massage brush to really stimulate your scalp. Not only does it feel amazing, it helps ensure good blood flow to your scalp follicles and clean up any sebum build up. On days you don’t use shampoo, either just do a massage with your fingers or just use water to clean your hair in the shower and do the massage. Depending on the moisture/protein content of your hair, use conditioner but infrequently. I use a very small amount of conditioner about once a week, but again I have fine hair. Only use the conditioner about halfway down your hair length to avoid weighing down your hair by your scalp, this can help you keep your hair healthy but keep from getting flat. Make sure to thoroughly wash the conditioner out.

I squeeze my hair out and then use old t-shirts to dry it instead of a towel and after a little bit of that I noticed my hair improve over using a towel which can roughen your hair and pull moisture out (allegedly). If you want to feel really fancy, pick up a cheap silk pillowcase, mine a few years ago was about $20. It’s very smooth so it helps keep your hair from getting snagged and tangley at night.

Now for product - I’m a recent convert over to using mousse. I hated how flat and no volume my hair looked when I didn’t want to wear it up, and how much it kept falling in my face. Mousse helped give my hair volume and hold it back without giving it that crisp look gels and hairspray can give or the oiliness of pomades. There are dozens of types of mousses on the market but look for one that advertised volume and medium hold. With your hair slightly damp, rub the mousse in your hands to activate it, flip your head down and your hair forward and run your hands and fingers through your hair from root to tip along the front half of your hairline and a little in the back. Scrunch your hair up and run your fingers through towards the back as you feel the mouse dry. Flip your hair around a little and then stand up and flip it back. Wet your hands just a little and run your fingers through your hair towards the back, adding a little bit of mousse if you need it and let it air dry. This should give you a good amount of volume and also help keep your hair out of your face (my least favorite thing about long hair.

I hope this helps you out and feel free to ask any questions. I’m not an expert but I’ve had long hair for several years now and I’m finally happy with how it looks both up and down

I’ve noticed this for about 6 months or so, particularly on full screen videos

It’s a little different, more historical content than “vintage” but Tasing History is a great YouTube channel

Which Mac are you running on? I haven’t gone through the game porting kit setup yet because it seemed like a real pain in the ass and I want confident the performance would be worth it in the end on my m2pro