• marine_mustang@sh.itjust.works
    link
    fedilink
    arrow-up
    13
    ·
    2 months ago

    The pagers that detonated were the latest model brought in by Hezbollah in recent months, three security sources said.

    I wonder if Israel has a unit similar to the NSA’s TAO (tailored access operations) where they inserted people into the manufacturing plant to tamper with devices before they even left the factory.

    • comador @lemmy.world
      link
      fedilink
      arrow-up
      6
      arrow-down
      14
      ·
      2 months ago

      This is more simple than that. They’re sending a malicious payload to the target numbers which causes the pager to heat up the battery and explode. Nothing manufacturing related.

      • lemmyman@lemmy.world
        link
        fedilink
        arrow-up
        25
        arrow-down
        2
        ·
        2 months ago

        I would love to see a detailed technical explanation for how this would be possible.

        I design battery-powered electronics for a living and I can’t think of any design that would let a battery explode with the violence these did, let alone on command. Unless it were deliberate.

        • Badabinski@kbin.earth
          link
          fedilink
          arrow-up
          2
          arrow-down
          1
          ·
          2 months ago

          Same here. Like, there has to be some kind of specific vulnerability in these pagers, right? You can’t just “heat up the battery,” you need something that will actually use the power. If the pagers weren’t compromised between the manufacturer and the recipients, then there’s some major fuckery afoot.

        • steventhedev@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          2 months ago

          Best I can get is figuring out a way to reuse some pins on the uc to isolate two or three caps to use as voltage pumps and then dump the whole thing at once into the battery.

          I somehow suspect Electroboom is going to get a lot of new viewers in the next few days

          • comador @lemmy.world
            link
            fedilink
            arrow-up
            3
            arrow-down
            1
            ·
            edit-2
            2 months ago

            Reading a bit more into it, seems all of them were Motorola Apollo Gold pagers (I stand corrected), so they had to have exploited the li-on charging pins to either create a loop causing thermal runaway, or spam different voltage discharging signals via their payload. Regardless, it’s a truly impressive exploit.

        • comador @lemmy.world
          link
          fedilink
          arrow-up
          5
          arrow-down
          4
          ·
          edit-2
          2 months ago

          Here’s your detailed tech possible explanation with citations:

          Pagers known used in the attack were Apollo Gold AP-700, AP-900 and AP-924, which all use the same ALA25 programmable logic chip.

          If you google the Gold Apollo AL-A25 Programming Manual and look for battery gauge inputs, you can see it is possible to program the voltage ranges.

          By setting the battery gauge level-high to an invalid selection that is also greater than the low level it creates a bridge between the anode and cathode, resulting in thermal runaway which will in fact cause the battery to overload and explode due to the increased temperatures.

          We’ve done this using similar batteries on battery backed write cache controllers sitting in a nema-3 enclosure just to see what the tolerances are.

          Edit Citations:

          https://www.mitsubishicritical.com/resources/blog/thermal-runaway/

          https://www.apollopagers.com/support/al-a25-gold-pc-programming-manual/

          https://www.manualslib.com/manual/1198103/Gold-Apollo-Al-A25.html?page=23&term=voltage&selected=1#manual

          Programmable chip responsible:

          GAPOLLO AL-A25_6 RA5794.1 chip = AP-900 and AR-924 models

              • nova_ad_vitum@lemmy.ca
                link
                fedilink
                arrow-up
                3
                arrow-down
                1
                ·
                1 month ago

                By setting the battery gauge level-high to an invalid selection that is also greater than the low level it creates a bridge between the anode and cathode, resulting in thermal runaway which will in fact cause the battery to overload and explode due to the increased temperatures.

                First part of this is gibberish. Second part is just describing a short of the battery, which will destroy it, but is completely inconsistent with video footage which shows small high explosive charges going off. That is not how battery shorts happen. This was not done in software, there were actually explosives installed in the devices as reports are starting to now state. But you know, good job on the sheer volume of words you wrote.

                • comador @lemmy.world
                  link
                  fedilink
                  arrow-up
                  2
                  arrow-down
                  3
                  ·
                  1 month ago

                  Surprised you responded, I’ll respond back later when I get home so I can share the level of detail it is I am talking about.

                  • nova_ad_vitum@lemmy.ca
                    link
                    fedilink
                    arrow-up
                    4
                    arrow-down
                    2
                    ·
                    1 month ago

                    Nothing you say will make a lithium ion battery into a high explosive. There is no combination of words you can say that will make that true.