Just for the record… it has to do with practicality.
the notches are spaced similar to a clock, but with the deadzone most potentiometers have, it doesn’t go a full 360 around, so they stop at 11. This makes for an intuitive scale with familiar spacing on the notches- even if it is entirely arbitrary.
Most potentiometers have a full rotation or 270°, sometimes up to 300°. By convention the mid-travel is at 12 o’clock. That would make the 0 around 7:30 and the 10 around 4:30.
Even the 11 clock position makes no sense, most amps will go from 8 to 4.
Edit, I see what they did. In the picture they used 7 to 5 o’clock as min/max, (which is essentially the same as my 8-4). For some reason they adapted the o’clock numbers to the dial number which is not helpful.
The o’clock numbers are meant to be a static reference point with 12 always at the top most position. You don’t bend the clock scale to match the knob min/max.
Just for the record… it has to do with practicality.
the notches are spaced similar to a clock, but with the deadzone most potentiometers have, it doesn’t go a full 360 around, so they stop at 11. This makes for an intuitive scale with familiar spacing on the notches- even if it is entirely arbitrary.
Based off of my peripheral I really thought that deadzone was Saddam for a second
dammit.
missed an opportunity…
With the power of editing and bribery, we can all pretend you did it right the first go around.
This is not at all the case.
Most potentiometers have a full rotation or 270°, sometimes up to 300°. By convention the mid-travel is at 12 o’clock. That would make the 0 around 7:30 and the 10 around 4:30.
That’s not the history of that thing: https://en.wikipedia.org/wiki/Up_to_eleven
you mean 10, most amps stop at 10.
At the 11 o’clock position, I think they mean. That’s a bit arbitrary tho
Even the 11 clock position makes no sense, most amps will go from 8 to 4.
Edit, I see what they did. In the picture they used 7 to 5 o’clock as min/max, (which is essentially the same as my 8-4). For some reason they adapted the o’clock numbers to the dial number which is not helpful.
The o’clock numbers are meant to be a static reference point with 12 always at the top most position. You don’t bend the clock scale to match the knob min/max.
…IGN goes from 6.5 to 9.5…
Holy shit … even your name is surrounded by ellipses.