It’s Sunday somewhere already so why wait?
Let us know what you set up lately, what kind of problems you currently think about or are running into, what new device you added to your homelab or what interesting service or article you found.
I’ll post my ongoing things later/tomorrow but I didn’t want to forget the post again.
You must log in or register to comment.
Adding a second vdev today to my primary pool running on Scale. New vdev will be 12TB by 4 wide, with existing at 10TB by 5 wide. Drives are all 7,200 RPM enterprise grade, CRM drives.
May also add a second pool with the drives from my previous build which would be 10TB by 4 wide. These drives are 5,400 RPM so I would not use them in my primary pool.
Also, Noctua sent me a bracket (at no charge) so I can correct the orientation of the CPU fan to be facing front to back (currently left to right). I also have a couple 80mm fans and a 120mm fan to add to the server case. Once all of that is in place I hope to start running Ldarr against my libraries without CPU temps hitting 95°C.
Installed grocy on a server and magic mirror on a pi. Now we can track all the daily tasks of life which makes my wife happy
My job let me buy a bunch of Pis to set up a cluster for a demo so I’m having a lot of fun
Pis
🤔
It’s for a streaming service.
Does this service provide the proper end point for the stream?
What kind of cluster, kubernetes?
Nothing so fancy. Just some postgres machines to show off different recovery modes
Cool enough!
I’m starting to see mastodon users on my tiny pixelfed server. It’s such a good feeling.
On the sad side, my Lemmy update went south and I had to remove it off my setup. Still looking for a good replacement for max two users. Something dirt simple like GoToSocial turned out to be.
I had a similar problem with Lemmy, UT’s not optimized for small instances.
I went with PieFed und am very happy with it.
What’s UT? Was about to run Lemmy myself
Auto correct changed “it’s” to UT’s.
You need kind of a beefy server which is not worth it for one or two people. That is why I installed PieFed instead which does the same but plays nicer on a small VPS with fewer resources.
Weird, I’ve heard exactly the opposite, some people are running Lemmy on a dual core. Just get a drive big enough if you plan to follow many communities. Guess I’ll try anyways
Pyfedi is what you want.
I tried getting it setup but it didn’t want to work on my system. The docker container didn’t work with some errors and the docs seem like they need a bit of work. I love piefed, but if it takes more than a weekend to setup then I personally don’t have enough time.
Great software though.
I got it to work then moved it to another server and couldn’t. So I get that.
If I can figure out how I setup lemmy would you want to know?
Sure! Truthfully, unless it’s dead simple I’m going to let others host.
Scripting enlarging 2400 10x10 png files to 512x512 Stable Diffusion generated images that look like high resolution cityscapes in the style of Salvador Dali. I can’t get the API to spit out a single image.
I’ve been trying to learn K8s and more recently the Gateway API. The struggles are that most Helm charts don’t know Gateway (most are barely Ingressroute) and I’m trying to find a solution to one service affecting the other gateways.when a service cannot find a pod, the httproute fails and when one route fails, the ingress fails. It’s a weird cascading problem.
Right now, I’m considering adding a secondary service to each gateway that resolves to a static error page. I haven’t looked into it yet; it cane to me in the brief moment of clarity before I fell asleep last night.
Also, I may be doing everything wrong, but I am learning and learning is fun.
I’m running Nextcloud and PaperlessNXG on my servers. Over the last few months I tested out my remote management. Now that I’m back home, I’ve been making a few adjustments based on my learnings. Firstly, Wireguard is slower than a turtle, while Tailscale has been a little bit faster. I’m guessing this is due to my upload speed and switching to fiber may fix this.
I’d also like to add TubeArchivist back in since there’s some great videos that I don’t trust Google to preserve given the direction things are going.
The folks on the “privacy” Lemmy gave me some good tips on app replacements and after making a big spreadsheet with all my apps, their licenses, etc., I cut down my remaining proprietary apps by at least 50% and I only have a few proprietary essentials that still depend on Google Play. I’ve been meaning to do this for a long time and I almost have a path towards completely removing all Google, Amazon, and Microsoft products from my life.
Next, I’d like to set up Wander to eventually get rid of Garmin/Strava but I haven’t been able to figure it out and I’m still locked in to some degree because of my hardware (Garmin watch). The Ring doorbell has to be the next thing to go, but I’m exhausted and haven’t had the motivation to start a new project until the dust settles from the last one.
Attempting to get my lemmy instance going properly. Got it running on digital ocean but they don’t allow outgoing email and reccomend a third party service. I decided to try out Hetzner and am getting errors saying that docker compose isn’t installed when running the ansible script.
I’ve been using OVH without issues. How big is your drive space though? Lemmy uses quite a bit. Federation can take some time too.
DO lowest tier i’m on is 20gb, but hetzner is slightly cheaper with more ram and 40gb.
Mine is using about 100GB atm, ran it on a 40GB to start but the data management was a bit much. Good luck though!
I’m not doing any users or subscribing to any communities, just hosting a community. Should be pretty chill.
I setup a VPN for my moms Synology so I can request and download media for her through my local qbit instance and using Radarr/Sonarr to move the files over.
I have a problem where both arrs don’t auto start when I power up the debian VM in Proxmox even though the daemon is running and restart policy is set to always…
She doesn’t make a lot of requests so I just go and start them manually but I would eventually like to get it fixed…
Slowly building up my self hosted test env in a VM on my gaming PC.
Most recently playing with homepage so I don’t have to remember as many sub domains.
Eventually I will get the *arr stack going so my jellyseerr instance is more automated.
I’m an idiot so it took me about 3 frustrating years to get all the docker containers working. Worth it every day
I have setup a immich docker container and am slowly moving users and images from google photos.
Replacing Google Photos is still on my to-do list. How do you like Immich so far? Did you compare it to any alternatives?
Interested in this too - immich gets so much viral hype I’m a little suspicious of it
I set it up a couple weeks ago. It’s alright; facial recognition works pretty well, the files are easy to manage, and setup was pretty straightforward (using docker).
Searching for images works fairly well, as long as you’re searching for content and not text. Searching ‘horse’ for example does a pretty good job showing you your pictures of horses, but often misses images containing the word horse. Not always, but it’s noticeable to me.
The mobile apps work well too; syncing files in the background as they appear, optionally creating albums based on folders. Two things I find missing though are the ability to edit faces/people in an image (you’ve gotta do that from a browser), and the ability to see what albums an image is in and quickly navigate to one.
It’s a developing project that’s well on it’s way. A good choice imo.
I have recently setup my paperless-ngx instance and have uploaded all my scanned documents. Now I have to tag all that stuff which seems like a lot of work. So I’m looking into paperless-ai… 🧞
(pre ai) I found that adding a few, tagging them correctly and then adding the rest worked pretty good with auto tagging. Don’t know how much of a difference paperless-ai is going to make but it sounds interesting. I would just make sure to only plug in a selfhosted thing
Today I’m experimenting with Ansible. Wanna try setting up a Docker hosted RSS reader with it. Hopefully will write up controls for my whole Docker server with Ansible once I’m more familiar.
I’m still using Docker Rootless, which I want to change for Podman since Rootless is second-class for Docker, but I haven’t been able to read the documentation enough to understand Podman Quadlets to migrate my compose files, and there are some incompatible configurations so even if using
podlet, I have to edit some things manually.I also want to migrate to MicroOS if possible in my server, but I’m still testing things in a VM to understand enough and the cost-benefit u.u
I’m trying to figure out why truenas scale refuses to auto start virtual machines… Other than that everything’s smooth atm :>
