Now i only have to flip the usb cable 3 times!
The game changer part is less e waste
Its convenient and superior to Micro. But mostly its just nice that both mine ans my wife’s phone uses the same cord.
It was great!
I could get rid of a lot of “extra” cords. I can just keep one usb c and charge my phone, my mouse, and headphones with one cord. Shoot, I can even charge my controllers now too. I like that they’re becoming like outlets. Like, this is just how you get power to the device(S). Without searching for the “right” cord all the time.
I regularly, accidentally, grab a USB-C>USB-C cable instead of USB-A>USB-C. And then I think by myself, I’ve never had this many cables that don’t fit.
Good thing is, I have plenty of USB-C cables of different lengths, most of which I don’t know the origin. At least they’re in a box in my home and not in a landfill.
A little disappointing.
I had been pretty well consolidated to just lightning cables for everything. It did what I needed, the connector is small, reversible, easy to use, and it fit most electronics for my family of four. I had built up a nice stable of accessories like power banks and charging blocks that fit everything and hadn’t needed to buy anything new in years.
The switch to USB-C came with great fanfare and seemed like a good idea. However it really doesn’t give me any direct benefits and I have to buy all new accessories. Now I’m in a transition mode for a few years where I need usb-c, usb-a, and lightning cables and chargers. Worst of all the market that I kept being told was leaving behind still has more support for usb-a - my laptop has mostly usb-a, even new model motherboards for building my kids gaming computers are mostly usb-a, I don’t see a good selection of usb-c chargers, power banks are still mostly usb-a, keyboards and mice are usb-a, kvms are usb-a, etc
Trying to switch to usb-c has meant more cable types rather than fewer. It has meant buying duplicate chargers and it has meant less convenience where usb-c is not really mainstream yet. Hopefully the market will more fully adopt usb-c quickly but I meant to be a late adopter to this transition and feel almost like an early adopter
The failure of pc manufacturers to move to C quickly is sad. Apple has moved over quicker. That says a lot.
USB-C is pin-compatible with every single other USB plug, so you should be able to get away with all USBC cables and some adapters for whatever plug type you’re trying to plug in.
There are only 3 types of pin sets, USB-C(USB 3.0 pins + 3 extra pins), USB-3.0(USB 1.0 + 5 extra pins) and USB-2.0 and lower. Everything else version wise is the controller on the actual board, not the cable.
Cable-wise you only need one to get the benefit of every other plug on the market.
Adapters have their place, and I do have a few, but they’re no cheaper than cables and a bit annoying.
Like others, USB-PD is amazing. My monitor has 90W which is plenty for my laptops. Gaming laptop, not so much. The only device I have that isn’t USBC/Thunderbolt is the damn mouse. I rarely ever need a USB A port for anything other than charging. Even my flash drives are all USBC.
I have been able to use 1 charger for almost everything for several years now. Sometimes I have a finicky device that doesn’t like the high wattage PD chargers and will only trickle charge, but work fine with my other smaller charger. The GaN chargers are nice and compact. I break USBC cables a lot less often, but that is because I am a walking disaster most of the time. I would break micro USB cables constantly, or rip the ports to pieces.
One note though on USBC ports on a monitor. Beware using the really really stiff cables on ports that are positioned where the cable would be parallel to the table instead of the port pointing down. That port will definitely wear out or break entirely from the constant downward force and lack of support of the cable in the port. This is especially true if you use a monitor arm and the cable gets moved. Seen this on both Samsung and LG. My Dell points downward. I really like the pro PS5 controllers as it comes with a little cage that holds the USBC cable in place and protects the port from exactly that scenario. These monitors absolutely need something like that, especially with how expensive they are.
Summer up how I feel about usb C now.
Except maybe some devices (like IoT) that are powered up by an always plugged micro-usb, my cellphone is USB-C for a long time now, and my laptop has 3 USB-C/TB (no A), so it’s easier for a couple of stuff. But I have a usb-c hub with multiple USB-A outlet because I still have a couple of devices to plug like keyboard, trackball, webcam, headset, UPS, FTDI stuff, etc.
No more micro-USB plugging/unplugging for phones.
The prob with usb-c is mainly for powering hungry devices, you need 60W cable, 100W cable, 240W cable, etc.
JSAUX makes a great 240W cable that’s fairly priced and has 240W printed on the ends. It’s stiff but that’s because it’s actually gauged for 240W. I just decided to buy those in blue for anything that required more watts than mobile devices. Then I get at least 30W rated cables in red for all the mobile stuff. Super easy to know which is which at a glance.
I get my 60w and 100w cable at Ikea, they meet world standards and I trust them.
Not as much as going from coax to RJ45, or from PATA to SATA, or from PC/AT to PS/2 to USB or Bluetooth, or from D-SUB to DVI to HDMI or Display port, or from the old serial and parallel ports to USB or Bluetooth (I mainly skipped SCSI), and I sort of miss having to turn the connector 360° around for it to fit…
I went through all of these, and honestly plugging in a single cable into your laptop and having power, external display, network and input peripherals all connect instantly is pretty damn cool.
I don’t think I’ve had a single USB-C cable/connector/socket fail yet. Which can’t be said of Micro-USB.
But other than that, meh.
The stability of Mini USB I liked most. Plug a PS3 controller in 100 times and it always seemed solid. Micro USB was flimsy, but I wish the would have done usb-c like the lightning connector and made it solid. I would think it would last longer that way, but I never owned an iPhone so I could be wrong. Those could be more prone to snapping, like palm trees vs pine tree.
I broke 1 mini USB on my Blue Yeti over a decade ago, but no port would have been able to survive that torque, lol. Other than that, it’s usually rock solid
I’ve seen multiple people snap lightning plugs. Never seen a broken USBC plug yet
I work in a school with a 1 to 1 Chromebook program. I see them pretty regularly, mostly they are just bent hard and stop working, but I’ve seen some pretty impressive destruction.
Yeah, nothing’s unbreakable. I once saw a kid shove a whole ham sandwich into a cd/optical drive. People do weird stuff. It probably would have worked afterwards too if someone cleaned the mustard off the lens. Never checked, as even back in 2006 it was rare to put CDs in school computers. The age of flash drives has already arrived.
Not a game changer at all. In fact most of my peripherals still use the older style usb connectors. I’m not planning to run out and buy new everything.
I would like to see appliance chargers switch to USB-C. All these stupid wall warts for electric toothbrushes and shavers are ridiculous.
It’s pretty cool but like all connectors, it fails eventually.
A lower strength more pinned Magsafe type of adapter would have been cool. They would be more costly though so I assume that’s why we don’t. Reversible, solid, and don’t have lose pins to break
It’s nice that my phone charges quickly, but otherwise I don’t notice. It’s just one more cable type I need to search for.
Charges faster, but also doesn’t break all the time!
I’ve actually had the opposite experience with USB-C. It seems to break all the time. I’ve talked about it online though, and it appears that I’m the only person experiencing that. Perhaps I just had a rush of bad luck with cables and devices.
USB-C ports are especially prone to dust/lint buildup that can prevent the plugs from seating properly in the ports. Worth trying to scrape them out if they stop working right. I like to use a staple that I’ve unbent, but it has been pointed out this probably isn’t the safest tool. Just avoid the contacts and only scrape the bottom and sides of the port. It’s amazing how much crap comes out if you’ve been using the device for a while.
I’ve done that using a floss pick, but nothing ever comes out. I think the cables are just crap, or this Pixel Phone has an issue with the port which shorts out all of the cables eventually. I had to exchange my first Pixel phone because the USB port completely stopped working. This one seems like it might have some other issue.
I buy mine on aliexpress … Whete do you get yours 😅?
Amazon
The jungle?
Jk ;-)
It’s pretty convenient. Now I can take my soldering iron and my power tool battery (with SN USB-C adaptor) and solder wherever the fuck I want
