• lime!@feddit.nu
      link
      fedilink
      English
      arrow-up
      27
      ·
      2 days ago

      that’s a first-gen chevy volt from 2012-2013. it can’t fast-charge at all, it’s limited to line voltage only. a full charge takes five hours, give or take. thankfully it’s a hybrid.

    • femtech@midwest.social
      link
      fedilink
      arrow-up
      1
      ·
      2 days ago

      I changed off a 12v 20amp outlet for over a year at my house till the charger was installed. It would take 12 hours to charge from empty to full but never had that happen except going on trips, then I would use the DC charging stations.

    • xlash123@sh.itjust.works
      link
      fedilink
      arrow-up
      4
      ·
      2 days ago

      The car can take 120/240 V AC input. Internally, there’s a AC to DC rectifier that brings the voltage up to the internal battery’s voltage. For 120V 15A charging, this is pretty slow in general since EV batteries have a large capacity.

    • filcuk@lemmy.zip
      link
      fedilink
      arrow-up
      40
      ·
      2 days ago

      Most EVs can charge off kf a regular socket using a dedicated cable.
      It can take days to charge.

      • thanks_shakey_snake@lemmy.ca
        link
        fedilink
        arrow-up
        23
        ·
        2 days ago

        Can confirm. Mine will take about 3 days to charge from very low to full on a regular wall outlet. Still worth it sometimes though, like when I’m visiting family or camping or something. If I’m gonna spend the day somewhere (like 6+ hours, let’s say) it might be worth it.

    • wander1236@sh.itjust.works
      link
      fedilink
      arrow-up
      23
      ·
      2 days ago

      There are 3 charging levels. 1 is basically just “plug your car into a wall outlet”. 2 is more powerful, and usually involves installing a little charging box with a cable, but it’s still AC and fairly slow. 3 is the DC fast charging that operates at crazy high voltages and currents.

        • wander1236@sh.itjust.works
          link
          fedilink
          arrow-up
          1
          ·
          2 days ago

          Is level 2 solely defined by “240V AC”? I wasn’t sure, although the portable chargers some brands have in the US with 240V attachments are still level 1 I think.

          • lengau@midwest.social
            link
            fedilink
            arrow-up
            4
            ·
            1 day ago

            I believe the two requirements for level 2 are 200 VAC and 2 kW. A 208V 30A oven outlet in a typical American apartment is level 2, but so is a 240V, 15 A plug in a typical European, well, any room.

            The 240V, 30A+ portable EVSEs many cars come with are level 2, though they are often also able to do level 1 charging if they work on 120V outlets.

    • i_dont_want_to@lemmy.blahaj.zone
      link
      fedilink
      arrow-up
      12
      ·
      2 days ago

      My guess would have been strain relief if something tripped over the wire and pulled on it. Instead of putting pressure on the port on the car, it will instead put pressure on the knot by the tire.

      But looking at the other answers I guess I was wrong lol.

    • lime!@feddit.nu
      link
      fedilink
      English
      arrow-up
      24
      ·
      2 days ago

      because the chevy volt uses a J1772 charge plug which, unlike the Type 2 used in Europe, doesn’t have a lock in it.

      this is a very annoying fact about the chevy volt.

      • lengau@midwest.social
        link
        fedilink
        arrow-up
        4
        ·
        2 days ago

        Many cars with CCS type 1 will lock a J1772 the same way they lock the type 1 port. Sad the Volt doesn’t.

        • lime!@feddit.nu
          link
          fedilink
          English
          arrow-up
          4
          ·
          2 days ago

          it does have a setting for triggering the alarm if you pull the cable out without unlocking the doors. which just feels like such a non-solution.