• TheTechnician27@lemmy.world
    link
    fedilink
    English
    arrow-up
    11
    ·
    1 month ago
    1. Test the cable first if you have a spare.
    2. Test the AC adapter if you have a spare.
    3. If both fail, inspect the charging port with a flashlight. 4a) If it looks dirty, try cleaning it out with a toothpick (if you have a dedicated plastic tool for mobile repair, use that). 4b) If it doesn’t look dirty, refer to 4a. What often happens is that lint from your pocket compacts over time as it gets in there and then gets pressed in by the charger.
    4. If this doesn’t work and you have a good, locally owned mobile repair shop nearby, they might look at the port for free just to see if there’s anything you missed.

    Only after all of this would I start to strongly consider the phone itself as the culprit.

  • Tigeroovy@lemmy.ca
    link
    fedilink
    arrow-up
    23
    ·
    1 month ago

    Time to fish out the impacted lint from the charge hole with a pin! You’d be surprised how much lint can get jammed up in there.

  • Ek-Hou-Van-Braai@piefed.social
    link
    fedilink
    English
    arrow-up
    2
    ·
    1 month ago

    Mine is at the point where there is only one specific USB-C cable that I can charge it on.

    Literally all other cables simply won’t charge it, and now it’s at the point where I need to have that cable in a very specific position for it to charge.

    At least wireless charging still works, the phone is only 3 years old, I really should replace the battery and port

  • deegeese@sopuli.xyz
    link
    fedilink
    arrow-up
    5
    ·
    1 month ago

    Charging ports wear out if used often, which is why I usually charge wirelessly and keep a lint cap on my port.

  • HappyTimeHarry@lemm.ee
    link
    fedilink
    English
    arrow-up
    6
    ·
    1 month ago

    I got some magnetic detachable usb cables and the end that detaches never gets unplugged from my phone. Although i mostly charge mine with a wireless pad on my nightstand.

  • the_riviera_kid@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    arrow-down
    1
    ·
    1 month ago

    Possibility 1 the port is full of crap, clean the port with a thin stiff piece of plastic.

    Possibility 2 the port is broken, treat your equipment better.

    Possibility 3 the cable is bad, replace the cable and treat your equipment better.

      • scrion@lemmy.world
        link
        fedilink
        arrow-up
        13
        ·
        1 month ago

        They’re absolutely right, that is the cause 85% of the time. Make sure to get a non-conductive pick made out of plastic or wood (e. g. literally a toothpick) and remove the dust by circling around the little protrusion, then clean the rounded corners with a little hooking motion.

    • saltesc@lemmy.world
      link
      fedilink
      arrow-up
      39
      ·
      1 month ago

      It’s always this unless you can think of a time you specifically damaged the port. And you’ll be surprised how much shit comes out with the tip of a plastic toothpick; how it was somehow actually managing to still charge in the first place lol.

      • kernelle@0d.gs
        link
        fedilink
        arrow-up
        2
        ·
        1 month ago

        You’d be surprised how caked a charge port can be, you know you’ve cleaned it correctly when the plug goes in all the way and doesn’t stick out a bit.

        When it still doesn’t connect correctly and/or you feel play in de cable/chargeport, it might just need replacing.

      • Valmond@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        edit-2
        1 month ago

        Then repeat step 1.

        Note: cleaning didn’t work for my kids phone, took it to the store, they cleaned it out and it works since 1 year now.

      • mosiacmango@lemm.ee
        link
        fedilink
        arrow-up
        3
        ·
        1 month ago

        Get a wireless charger if your phone supports it. It will likely be slower, but still work.

      • lenuup@reddthat.com
        link
        fedilink
        arrow-up
        6
        ·
        1 month ago

        Take a toothpicks and carefully break it in two halves. Ideally you are left with something about half as wide as the original pick. You want thin and sturdy pieces to get into the port. Now carefully scrape the lint and dirt out of the port. The dirt tends to compact on the bottom, so you have to scrape a bit to get it all out. I would recommend to do it in direct sunlight to better see the interior of the port. Torchlights usually are either to bright on the spot or to dim.

        Works like a charm.

        How the pick should look like

      • LifeInMultipleChoice@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        18
        ·
        edit-2
        1 month ago

        Years ago when fixing phones most of the charging problems was just that. Most of the ear speaker issues were from makeup getting caked up in the mesh screen. And most of the motherboard issues came from people dropping them in the toilet/lake/ocean.

        • NotSteve_@lemmy.ca
          link
          fedilink
          arrow-up
          19
          ·
          1 month ago

          I have a friend who dropped his phone into a porta potty at a festival and then fished it out. Apparently he was drunk enough that he forgot about doing it and woke up in the morning wondering why his phone stank.

          There is no point to this story

          • LifeInMultipleChoice@lemmy.dbzer0.com
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 month ago

            On the old iPhones if you got lucky you could cut the power on it, pull the logic board out, and we’d stick it in an old jewelry vibrator filled with 99% rubbing alcohol. Hit it with a heat gun right away to disperse any liquid. Once dry id hook it up to a cheap screen and battery I knew was good before sticking it back in the phone, if that came on. Then work your way backwards replacing anything that needed to be replaced out of the other parts, or hook up to a docking cable to a computer to back up to iTunes, so they could get their data. Slowly apple forced everyone into iCloud backups, so the need dropped more and more for such though.

            • anomnom@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 month ago

              They also interconnected screens, facial cameras, color adjustments and all the other bullshit that’s making fixing these more and more annoying and expensive.

          • AtariDump@lemmy.world
            link
            fedilink
            arrow-up
            15
            arrow-down
            1
            ·
            1 month ago

            A teenage boy is getting ready to take his girlfriend to the prom. First he goes to rent a tux, but there’s a long tux line at the shop and it takes forever.

            Next, he has to get some flowers, so he heads over to the florist and there’s a huge flower line there. He waits forever but eventually gets the flowers.

            Then he heads out to rent a limo. Unfortunately, there’s a large limo line at the rental office, but he’s patient and gets the job done.

            Finally, the day of the prom comes. The two are dancing happily and his girlfriend is having a great time. When the song is over, she asks him to get her some punch, so he heads over to the punch table and there’s no punchline.

    • Psychadelligoat@lemmy.dbzer0.comBanned
      link
      fedilink
      English
      arrow-up
      27
      arrow-down
      2
      ·
      1 month ago

      Also a decent idea to snag a magnetic charging adapter to avoid this in the future

      Got one that plugs into my phone and a few of the other end for cords around my house and car, totally worth the 15 bucks I spent

      • cobysev@lemmy.world
        link
        fedilink
        English
        arrow-up
        24
        ·
        1 month ago

        My dad had Parkinson’s at the end of his life (and a general lack of coordination his whole life). Those magnetic charging adapters were a lifesaver for him. He just needed to get the cord close enough to the charging port on his phone and it would snap together. No coordination required.

        It was also nice when he would forget to disconnect the cord. As soon as he walked away, the cable would pop off. No more broken cables from being yanked out of the phone or the wall.

      • Apathy Tree@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 month ago

        I have these for all my chargeable things. Bought like 4 packs with multiple port types, so I have tons of extra cables in case some die. They are great for game controllers, phones, tablets, rechargeable keyboards, and all sorts of other shit. All you need is multiple ends, and you can use the same cables for everything. It’s glorious if you have a mix of port types.

  • finitebanjo@lemmy.world
    link
    fedilink
    arrow-up
    10
    ·
    1 month ago

    If there is a problem with capacitance then this won’t help, but if it might just be dirty then power it down and clean the charging port with a can of 99.99% compressed alcohol electronics cleaner, then use a can of air duster, repeat a couple of times. Afterwards, press the case firmly to ensure it’s still held together. Leave to dry completely before trying again.

    • BlueFootedPetey@sh.itjust.works
      link
      fedilink
      arrow-up
      2
      ·
      1 month ago

      Ugggg I was so close to pulling to trigger for one on my last phone death. But I was doing all this comparison and pricing, and at the end of it all, realized they arent sold in my shithole country and had like a extra 200 hundy shipping price. So im still android and the ogle. But next time… pretty sure itll be fairphone.

      By the way, any users of the Mint mobile service who have a fairphone who see this comment, please respond to me. Im still only like 90 percent sure I use one with that plan.

    • Honytawk@feddit.nl
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      1 month ago

      As long as the parts are available.

      Haven’t needed them myself, but I’ve heard stories where they couldn’t get a replacement part because it was sold out for a long time. Which kind of defeats the purpose.

      Still, it is such a robust phone.

  • taxiiiii@lemmy.world
    link
    fedilink
    arrow-up
    10
    ·
    edit-2
    1 month ago

    even if it were broken, this would be such an easy fix if phone companies wouldn’t make it impossible to repair their phones. its freaking infuriating.

    • AllHailTheSheep@sh.itjust.works
      link
      fedilink
      arrow-up
      2
      ·
      1 month ago

      I think you could do this repair at home with no prior experience on a lot of androids. for an iphone you have to remove the motherboard though which is pretty obnoxious