I am not familiar with the removing a section of drywall in order to hang a TV technique
Thewhole “story” seems dumb. They only checkt at that exact same height and decided to open up the wall.
deleted by creator
Use stud finder (beep) move it two inches (still beep) move it further (still beep) move it again (still beep). “Stud finder must be broken” Get another stud finder (still beep but the whole section again) “I need to know what’s behind this wall before I just bolt this TV to this fucking thing” (cut away the drywall) “I better make this look like something stupid for fake Internet points…”
That’s not the worst cludge I’ve ever seen, but it’s good and stupid alright.
But imagine, won’t you, an electrical outlet box attached with directly to the oven’s gas line. The outlet was for the microwave. My friend no longer lives in that condo lol
My friend no longer lives in that condo lol
By choice? Or by being forcibly evicted by the rapid expansion of heated gas?
How does it end?
They probably couldn’t watch Netflix that time 😔
The house rolled over
Couldn’t even bother to level the blocks 🙄 smh.
Ah yes. Load bearing connector box.
Wowzer trousers that’s bad. There’s even an outlet just to the left, what’s that all about??
Buuut
A stud finder works by sticking to the drywall screws just under the wall paint. A stud finder wouldn’t pick this up unless the hangers screws the drywall to that piece for no reason.
On top of everything else, the new outlet isn’t even close to even with the old one.
Going by the writing on the wall, it’s for a 3-way dimmer switch. It also is likely the picture was taken during its install and not from someone trying to find a stud
They’re more like depth detectors now. They dont work on magnetism, they work by detecting the ultrasonic echoes of what’s behind the wall.
In other words they’re good at knocking on the wall.
Both kinds exist.
It is helpful to have both.
Nah, modern stud finders can tell the difference between “drywall with stud behind it” and “drywall without stud behind it” with some rf whatever the hell it does
Gnomes. Gnomes live inside and use magic to tell you where the stud is. That’s show it works.
Those gnomes are pretty shit at magic then. I’ve yet to encounter a stud finder that works more than 40% of the time which is just enough to keep you using it but not quite enough to be useful.
Skill issue tbh
THANK you. Finally, someone tells us what’s really happening in there.
Oh yeah I totally forgot about the fancy ones. Never loved using them much but I’m sure that’s what the kids call “skill issue.” I’ll lay my life on the line defending the honor of my Stud Buddy though
I use a stud finder and a rare earth magnet with a small light metal chain that (if the stud is plumb) perfectly shows where the stud is.
Except some places use glue and 3 screws in the stud. Top bottom and middle. Then they’ll even push it and not put one in the middle, good luck finding a stud with a magnet.
Oops all studs
The stupider part is that it would be easier to stack out from the other direction.
There are 8 pieces of wood @ 1.5" each = 12" Studs are 16" on center.
So to stack from the right would be 2 pieces to be in the same place.
You can even see the gray box that opens to the wall behind it. That is attached to the stud on the right…its that close. But here I go applying logic to crazy.
My house is over 30 years old, and the studs are 24" apart. Frustrating when I need to hang things built for 16". 😭
Your house is incorrect. 16" on-center wall studs have been a thing for way more than 30 years.
Non-load bearing interior walls less than 8’ tall are often 24” studs.
24" on-center wall studs aren’t uncommon in building practices today
Most residential interior walls are 16"
If their house is single-story, then 24" would fit in a lot of local building codes.
If any of you find a house on the market with 24" centered 2x4 walls–run. That won’t be the only thing they went cheap on.
Engineered roof trusses have made most interior walls non-load-bearing. 24" on center is fine for such walls. Exterior walls are still 16" OC, though.
I spoke with a firefighter I know about those trusses. He said they were the worst thing in modern fire safety and that he refuses to buy a house with them, because once they start getting hot, you’ve maybe got two minutes before that stupid staple plate pops off. Two or three trusses get their stupid little plates popped off and the whole house is coming down. Makes house fires way more dangerous and time sensitive than they already were, apparently.
My great grandfather built a punch of apartment complexes back in the 70s, if their house is anything like those well… standardly annoying is the words that come to mind.
It hurts to even read that. I can’t even imagine your frustration.
But the gray box is in the way of that solution.
Or just put the box 4" to the right, directly on the stud. Why on earth they thought it had to be exactly where it is is beyond me.
perhaps it is centered between some further away objects and they cared about aesthetics.
To verify your stud detector works you must point it to your self, make a beeping sound, turn to your significant other and tell them “I’m a stud”
I bought one, put up to my dads back, let it beep, and said to him “i think its defective” 🤪
Dad v2.0
I taught my toddler to scan her mom (my wife) and say “look, I found a stud!”
I always thought of a stud as a male horse whose main job is supplying baby horse juice. I’m guessing that’s not what you mean?
Well that definitely makes it less …uh… cute.
I don’t have the willpower to not make this joke to my wife.
I do miss doing that to my ex-wife. There were those small things that I can’t enjoy being single. Well. For now.
Just think of all the things you can do without ever consulting someone else. Single has its perks!
It’s actually not bad. I have motivation to work out for me and not anyone else, I can spend money on things she called silly, I don’t even have to cook without flavor.
See? That’s the spirit! I’m glad you seem to be finding your groove without too much suffering.
Standard dad calibration technique.
I do that on my husband. He’s never too amused.
It’s okay, they’re using that special load-bearing drywall.
This is what happens when my wife goes…honey let’s move the TV to the left! Its not centered. Oh that’s not enough! Let’s try another 1.5"! Oh! Not enough! …not enough!.. Not enough!..
Do not marry. Its hell. But if you do, patch that wall real good… Oh I can still see the seam! Sand it again! Yes orange peal…nope! The paint looks a little off. Paint the room!. Oh you’re gonna hate me…can you move the TV another 1.5" please?
Finally someone gets it!
I sleep in a big bed at home with my wife
I hope you’re joking when you say your marriage is hell. If you’re not, maybe consider not being married? You deserve to not live in hell.
It’s a joke but it is hell in many respects. I like the way my hell makes me feel.
Like if she starts a one way conversation that extends for one hour and you don’t want to be the receiver so you move a little to test the waters but then she screams at you for walking away.
Logic says…well this wonderful person could do better with a wall. But nah! Its you! Your must listen to all the unactionable statements. Yup, that’s marriage. I’ve been here for almost a quarter century.
No matter what society says marriage is to make children and have them grow and become part of the society. Love is relatively new. We’re more like cattle who work on things for a company and then purchase those things at a discount so they profit off that discount… Whether it is a profit based on pure time to money to money to time transactions or time to minerals to money to time transactions. The government wants you married to make children. So don’t marry for that and keep it open at all times. Like the very best friendship you ever had regardless of all the god damn yada yada yada. Once she’s done with that, it’s all perfectly fine. Just shut down and keep the ears listening. You can mentally escape to a six flags…you’re about to drop into an outside spin loop!..and so then I said to her “heck no!”…and she walked away! Can you believe it?..and you drop! Noooooooo!..she continues… It wasn’t that exciting! LOL. Life’s a cookie, take a bite…Noooo! Lemon cake!!! Fine take another bite!
I’m on my second marriage, 10 years in this one and 13 in the first.
My relationship is easy. We don’t argue, we have the same goals, she’s my best friend, sex is a science where we know the other’s responses and are creative. We face hard things together. I could go on. It’s easy to love her.
Nothing like my first marriage, it was hell.
Ah that’s the spirit!
Think I’ll just stay single and keep doing whatever the fuck I want at all times.
This is entirely alien to me, and I can’t understand it, but… As long as you’re happy? I hope you are. For the most part, at least. If someone insisted on talking at me for long periods I’d lose my dang mind.
Oh my god its a joke. That’s what the internet is for. I’m not gonna discuss the state of my roof tiles or how I enjoy mowing my lawn. Good day though! That’s important!
Zing!
This type of wife hatred is commonly mined for nuggets of supposed comedic gold. “I hate my wife” is a type of comedy for guys that’s not very dissimilar from “I hate my kids and love wine” for moms.
This type of comedy was becoming pretty outmoded during the Obama years, but the MAGA zoomers in coalition with their older counterparts are trying to bring it all back.
My personal opinion is that it sucks, often isn’t funny at all, and that if you really hate your wife so much you should consider divorce.
God, thank you. I have a long history of trauma such that ‘jokes’ about an unfun, unhealthy life aren’t fucking funny when they could be a cry for help in ‘joke’ form. I’d much rather offer someone who’s ‘joking’ the support they might be too afraid to ask for than to ‘laugh’ at a ‘joke’ about a bad time.
yeah you see this type of thing lampooned as “straights humor” now
…are you OK?
Don’t take off the panels on your electric and light switches. You’ll find that they’re all like this.
It’s like when I first looked into the gap in the sheetrock around my breaker panel and discovered that my basement has at least 1 (and likely many more) fully wired outlets that were just sheetrocked over at some point. I definitely would have been happier if I hadn’t known that.
If it works, is it really broken? Just add more screws.
I’m sure from a code perspective there’s something wrong here, but there must have been an issue with securing it from the right, and someone saw a bunch of scrap lumber pieces and said, got an idea. It’s not structural and needing to hold weight, so I’m really curious why, other than aesthetics, this is bad. Once covered by drywall, will this be some problem in the future?
The OP describes the specific problem this causes. It’s expected that these types of boxes are attached to studs and have void space next to them on the other side. Deviation from that pattern can cause issues with later installations expecting studs in some places and voids in others.
I can understand that, it’s why we have standardization. But the fault also lays on assuming everything is exactly as expected. Otherwise we wouldn’t need stud finders at all, we’d be sure where every last 2x4 is. A depth measuring stud finder would tell you there’s an unusual mass and give you warning that all isn’t like you’d expect.
I know the adage “if it’s stupid and it works, it’s not stupid” is a thing, but this might be the exception to the rule
Maxim 43: If it’s stupid and it works, it’s still stupid and you’re lucky.
It doesn’t apply to safety items at all. Your car will function fine without seat belts.
The Troll Handyman
Reminds me of the troll head meme where the head copies into oblivion
America…land of the lawless.
I mean all builders/electricians/plumbers are cowboys. If the task could be standardized they’d not be making bank so consistently. The job is always ad-hoc, custom, and temporary-permanent
